Why 3D Printed Guns Are A Non-Issue

Early this morning my left leaning brother in law asked a simple question via text message; “I am wondering your opinion on the 3-D printable guns? As usual seems like multiple issues at play.” I didn’t answer him right away. Instead I decided to draft my thoughts in this post, mainly because I knew it was a lengthy discussion. Herein I will posit all the concerns of which I can conceive and the answers to each. • 3D printing technology being used to make guns is not protected by the constitution. I think this one could be the most debated because people constantly argue over the 2nd amendment and what arms are covered and which aren’t. To a purist like me, all ares are covered. But for the sake of argument we can say that, due to the protection of small arms in general, the constitution protects more than the common musket of the time and is unaffected by advancing technology. Further, manufacturers such as Coonan and Hudson have been 3D printing firearms for years (at least in the prototype stages). So the sudden ability to print a small single shot weapon by the consumer should not suddenly change legal scrutiny. • 3D printing of guns is wrong because they aren’t trackable, you can’t just make a gun! Actually, you can. The law states you can build your own firearm without government oversight so long as you aren’t selling the weapon. It’s perfectly legal to build a gun yourself. In […]

Continue Reading →

American Built Arms Company 3rd Annual Media Day

The folks at American Built Arms Co. have never failed to impress. Though the past years have been more humble in their setting, the gear has always been impeccable. In year one, we traveled to hidden start-up range to shoot the Mod X rifle platform at 300 yards. The rifles were great. The technology in the Oakwood Controls Target systems blew us away. Dead Air silencers opened our eyes to the wonders of multi-caliber suppressors. You can see that article here. In year two, we returned to returned to the least populated part of Virginia to shoot the Mod X Gen 3 chassis at a whopping 600 yards. The day seemed as hot as the inner most ring of hell but we still had a great time. AB Arms had managed to improve on a rifle design that I already found to be unstoppable in it’s ease of accuracy. They set us up at 600 yards and we knocked them down. The rifles were awesome, Oakwood Controls provided instant feedback and we were introduced to the devastation that is Gorilla Ammunition. Read more here. This year AB Arms outdid themselves. The 3rd Annual Media Day took place in northern West Va. I had a bit of a drive and practically no cell service. I wasn’t sure if my GPS would even get me to the location. The address and facility name were a complete mystery to both Mapquest and Apple maps. Where was I going? Luckily, Google maps found the […]

Continue Reading →

Walther and the market today

The Walther PPQ line is fantastic as a whole and I think it is somewhat representative of the entire company and it’s time to take a look at Walther’s success or lack there of…   In the last 2 years Walther has made some seriously good moves and stepped up to bring very high quality to the market at a reasonable price. The M2 version of the PPS is a big success, the PPQ line and as of 2017 the Q5 and Creed. All of these guns are doing great things in different portions of the market. So why is it that Walther isn’t the name at the top of the list of ‘gotta have it’ guns? Why is it that Glock, Sig, Smith&Wesson and others top the list and leave Walther in place as an afterthought? It isn’t function. I think it’s sex appeal. We’ll get back to that soon.   First, let’s take a look at the Walther heritage. Post WW2, the PP and PPk lines were great shooters and a little heard to get as they were made in Germany and weren’t as readily available to the American market as other options and at the time revolvers were more popular. Later, Ian Fleming’s novels began to make their way to the silver screen and James Bond introduced the PPK to movie going American audiences in a way that made it exotic and sexy. The PPK became popular and was a great little gun in it’s time. If […]

Continue Reading →

Medical Records Mean Nothing

In case you didn’t know, releasing medical records will mean nothing. Here’s why… Amid concerns for the health of political candidates it seems people think medical records will clear up the issue. It won’t. Whether you worry about Trump’s weight or Hillary’s collapse, a friendly peek into a doctor’s file will mean nothing. The simple fact is doctors have tunnel vision (maybe the candidates are counting on it). I can tell you from years of experience doctors only make documentation of conditions they are treating at that visit. As an example, you may look at the records of an orthopedic treating a broken arm; you will learn more than you imagined possible about that break. However, nowhere in the file is it mentioned the patient is a paraplegic in a wheelchair. That’s a big part of the person’s overall condition, but it’s not the condition being treated. So, records from a single doctor may explain pneumonia but never mention other chronic underlying neurological conditions. In fact, with computerized records, anything not filled in by the doctor may autofill as normal. In this case, the official record has false information. This is a regular occurrence. Doctors are human, they take shortcuts like everyone else. So what about getting the records from a primary care doctor? The PCP isn’t treating any serious problems. For those, the patient is sent to a specialist. The PCP may or may not get a copy of those records and will likely ignore the conditions since he/she […]

Continue Reading →

A B Arms second annual media day

A B Arms second annual media day On Tuesday, July 26, 2016 we made our way back down to Guardian corporation’s Charles city Virginia location for a second annual media shoot hosted by American Built Arms Company. Last year we visited in order to test out the mod X rifle chassis system on the available 300 yard range. This year, it was all bigger and better. A B Arms was showing off generation three of their Mod X chassis system and Guardian Corp. had a 600 yard range waiting for us (do the math, that’s 1/3 of a mile). We knew the temperature would be soaring that day but how often do you get a chance to shoot at 600 yards and get instant feedback from a targeting system like the Oakwood control system? It’s a no-brainer. A B Arms company A B Arms is a small company based in Pennsylvania and the Mod x is their claim to fame. Simply put the model X is a chassis system that allows you to drop a Remington 700 (and clones) bolt action and barrel into a modular system that allows you much more freedom, adjustability and potential  accuracy while adding a detachable box magazine. Now with the generation three the mod x has been seriously field tested and revamped based on the feedback. That feedback came from swat teams, sniper instructors and some other serious long-range shooters. The resulting changes are seen in the style and placement of grip, a more adjustable […]

Continue Reading →

Our Wedding Ring Curse – Broken?

Our Wedding Ring Curse   This may be off subject but when I see amazing service I want to share that business information so that others my benefit and so that those that do things the right way can thrive.  Thus my story appears in the blog section of this website. Our sad luck with rings in the past… When we got engaged and married, our rings were unique.  The diamond set I found for my wife was tension set in a bridge design like nothing I had seen before.  My ring was Tungsten with spikes around the band in such a way that they looked painful but were just short enough to be comfortable.  In our wedding, we passed the rings around the congregation to be blessed by everyone.  Those rings were irreplaceable to us.  So after a while of wearing a wedding ring I began to develop a divot in finger and my ring became too loose to wear.  I had to set about replacing it.  I ordered the same ring in a new size because Tungsten Carbide is too hard to cut and size, and it would have ruined the symmetry of the ring.  My new smaller band arrived and I wore it about 1 week before I found out that I am in the incredibly small percentage of people that are allergic to Tungsten.  Contact dermatitis made it impossible to wear.  So my unique ring was gone.  I was trading out cheap replacements while searching for something […]

Continue Reading →

GUNVOTE 2016

I don’t know about you but I am afraid. I am afraid of the coming elections. The republican side is down to a choice of 4 possibilities. I can only say I am sure of the stance of 1 of those 4 on guns. 1 of those 4 has never changed his opinion on guns and the 2nd amendment. 1 of those 4 has never supported an “assault weapons” ban. 1 of those 4 has fought to protect your gun rights in the supreme court. Please research the past of the candidates before you vote. It matters more this time than ever. Why is it a bigger deal this time? Because the next president will likely be the person to add the deciding vote to the supreme court roster. That means one of the 6 candidates from the 2 parties will set the rule of law for the next generation. Recent gun cases have been split 5 to 4 in our favor. It can swing the other way in the blink of an eye. This is the time to stand up for a single issue … protect your guns or you will lose them in time to policies and laws like those implemented by England and Australia. I have watched for years as the culture of the land I grew up in has eroded away like sand through my fingers. I won’t survive losing my rights too.

Continue Reading →

Why the gun industry needs Twitter

When discussing internet advertising, it’s clear that Facebook is the largest and most successful social media outlet available. Every computer and smartphone on the planet seems to have an account connected at all times. Facebook outlasted and replaced previous mega-site and rival MySpace leaving them in relative obscurity. The social leviathan continues to expand and if another popular social media application or site begins to gain market share Facebook simply buys them. The most recent and relevant example would be another wildly popular application; Instagram. So with Facebook being at everyone’s fingertips the obvious answer for business marketing personnel is to create and nurture a business page on Facebook. More recently, the use of Instagram to market with high impact visuals has proven to be quite effective. These tools are even more effective than most commercial television advertising because people follow the pages showing an active interest in the brand they follow. So, Facebook and it’s subsidiaries are the best alternative marketing available to businesses… Unless your business is weapons. Gun and knife manufacturers noticed a long time ago that their posts on Facebook weren’t being seen with any regularity by the fans that followed them. One day a post may be seen by 25% of a page’s audience while the next post only gets a handful of views. If seemed as if somehow Facebook was impeding reach of pages to their own audiences. The next logical step for weapon related pages was to attempt to boost posts buy paying […]

Continue Reading →

Ruger at SHOTShow 2016

Ruger at SHOTShow 2016   So Ruger came to SHOT this year with a mixed bag in my opinion.  As you may have already seen on the YouTube channel, my opinion may be a little controversial.  I am a big fan of Ruger and I am still very happy with some of this year’s offering, but if my opinion isn’t completely positive about each and every product so be it.  I feel that you came to a review site to read opinion after all, and if it’s not 100% happy, you can chalk it up to honesty. So let’s just jump into the controversy.  The Ruger American Pistol was revealed at the show and I am not a giant fan.  Is the American Pistol a big story, of course it is.  Ruger appears to be going after government contracts.  That’s fine by me the company has always provided an overbuilt, supremely safe product.  The problem for me is, it’s boring.  As far as shooting this gun goes,  I barely remember it.  I shot it in 45 and 9mm at shotshow and there was nothing that impressed me.  The gun’s styling is average.  The trigger is fine but when compared to the Walther PPQ it’s not as good.  The size seems a little bulky.  It doesn’t fit my hand as well as the Ruger SR9 does… It just feels like an “also ran” situation.  As in, not a winner not a loser, just one of many in the middle.  Sorry, it […]

Continue Reading →

Jesse James Firearms Unlimited

When I travel to ShotShow each year I go to work. I’m not there as a star gazing fan boy. The celebrities I see are there to do a job and I’m there to cover the show and get information on the industry. That being said, there are exceptions to every rule. I occasionally see people that really get me excited and if I am lucky, I may have legitimate reason to meet them.   This year I was very lucky to meet a man that is a bit of an icon for me, Jesse James. I have been following his work for well over ten years. When I first saw Jesse he was building custom motorcycles at his West Coast Choppers shop on television. The styling of his work was like nothing I had ever seen. The choppers had an aesthetic that was unique and beautiful. Every time I saw a bike finished it seemed to be the pinnacle of motorcycle achievement and then he would make a new bike that surpassed it. Needless to say anything that Jesse was doing became appointment television and a miniature of my favorite bike to date had a spot on the shelf nearby.   James is an artist and like most artists his creativity was later channeled into a new medium. The show Jesse James Outlaw Garage documented a little of his vision on four wheels.   Later, I was enthralled by his quest for more creative knowledge as he learned a […]

Continue Reading →